Home Support Contact Us Testimonial





















* Denotes items in diagram that are included with kit.

Included:
  • PA Commander Unit
  • Mounting Brackets
  • 9V Power Adapter
  • Ethernet Cable (3 ft.)
  • PBX Cable (7 Ft.)
  • 16-pin Plug for Inputs
  • 4-pin Plug for Audio/Amp.
  • User Manual
 Physical Specifications
  • Box Dimensions:  5.5" L x 3.5" H x 1" W
  • Weight:  Approximately 0.5 lbs
  • Aluminum Enclosure with Black Anodized Finish
  • Operating Temperature:  40° - 120°F ( 4° - 50°C )
  • Certifications:  FCC Approved
  • Made in USA
Interface Specifications
  Power   6VDC - 16VDC, 0.16W
  Network Protocols   HTTP: TCP Port 80
  TFTP: UDP Port 69
  IP Broadcast: UDP Port 6123
  Ethernet   10 Mbps Half Duplex (IEEE 802.3)
  PBX   DTMF Dialing, 1 to 10 Digits, and 0 to 60 Second Delay After Dialing
  Reset   Restores Default Configuration
  Eight Inputs   Screw Terminal Block (Unpluggable), 3VDC to 12VDC Sensor Input, or
  Dry Contact Closure Detect (3V, 3MA)

Capabilities
  • Message trigger when any input is activated
  • Message trigger when any input is deactivated
  • Message trigger at a specific time each day
  • Messages may be a combination of input and time
  • Random messages may be issued from any web browser
  • Integrateable with corporate software to program defined events

A max of 32 triggers (In any combination of the above) are supported.
 
Copyright © 2008 CCS, Inc. All Rights Reserved.